+86-13819126663
Fuktabsorberande avfuktare video

Fuktabsorberande avfuktare

138L Avfuktare

Beskrivning

moisture absorber dehumidifiermoisture absorber dehumidifier

Modell DH-5138C
Luftfuktighet 138L / D
Kraftkälla 220V / 50HZ
Nominell ströminmatning 1800W
Nominell strömström 7.8A
Arbetstemperatur 5-38 ℃
Cirkulerande luft 1000m3 / h
Kylmedel R22
Nettovikt 54kg
Bruttovikt 58kg
Tillämpa utrymme 120 ~ 160m2
Enhetsdimension (mm) 408x480x1030
Förpackningsstorlek (mm) 550x455x1135
Laddar antal 72pcs / 20ft
Betalningsvillkor T / T
Produktionsperiod 5 dagar
Giltigt datum 30 dagar

Produktbilder:

moisture absorber dehumidifier

moisture absorber dehumidifier

Do you need to close the window when dehumidifying the household dehumidifier? When dehumidification is required to close the window, we know that the principle of dehumidification is that when the refrigerant in the evaporator evaporates, a large amount of heat is absorbed, reducing the surface temperature of the evaporator, and liquefying the water vapor in the indoor air into water. This condensate will flow through the outlet pipe to the water pan and out of the room. At this point, you need to close the window, otherwise the outdoor humidity will enter again. It will lead to the danger of incomplete dehumidification, so it is best to close the window.  Dehumidifier dehumidification and power saving? First, the lower the temperature setting during dehumidification, the better the dehumidification effect is proportional to the power consumption. When the dehumidification function is set, it is necessary to continuously reverse the reversing valve of the compressor system to cool it for a while, and the heating is maintained for a while to keep the room temperature constant. The baby compressor will run continuously without charging.  Second, in the dehumidification mode, compared with the cooling mode, save power, because the compressor operation in the dehumidification mode is intermittent, when the ambient temperature is higher than the ambient temperature, the set temperature is mostly lower than 27C for general When the cooling is at 35C, the compressor hardly stops. Intermittent operation saves more power when the compressor is turned on and off in dehumidification mode, but it must be remembered that the dehumidification function does not replace the cooling function.  Dehumidifier dehumidification is easy to use? When operating in dehumidification mode, the indoor fan is always running at low speed, the compressor is turned on and off, and the refrigeration system is used for intermittent refrigeration cycle. The resulting cooling capacity is primarily used to balance the latent heat of the indoor air. The water vapor turns into condensed water. A small portion is used to balance sensible heat, which is to lower some room temperature. When the compressor is stopped, the room temperature will gradually rise slowly. When it rises to about 1C above the set temperature, the compressor will automatically start, allowing it to circulate continuously, keeping the room temperature close to the set value, while removing a large amount of moisture from the air.  We know that in the spring, the dehumidification mode can be used. The dehumidification function is a very practical function. Save money not only without the need to purchase a dehumidifier. And the dehumidification speed is also relatively fast. It can help people effectively adjust the humidity in the air. Especially for residents on the first floor, if the weather is moderately large, you can try to purchase the dehumidification function. After dehumidification, it can reduce the feeling of dampness before dehumidification, and can eliminate the uncomfortable damp feeling.

Behöver du stänga fönstret när avfuktningen av rummet?

När avfuktning krävs för att stänga fönstret, vet vi att avfuktningsprincipen är att när kylmediet i förångaren avdunstar, absorberas en stor mängd värme, reducerar förångarens temperatur och förångar vattenångan i inomhus luft i vatten. Detta kondensat kommer att strömma genom utloppsröret till vattenpannan och ut ur rummet. Vid denna tid måste du stänga fönstret, annars kommer fuktigheten utomhus att komma in igen. Det leder till risken för ofullständig avfuktning, så det är bäst att stänga fönstret.


För det första desto lägre temperaturinställning under avfuktning desto bättre är avfuktningseffekten proportionell mot strömförbrukningen. När avfuktningsfunktionen är inställd, är det nödvändigt att kontinuerligt vända kompressorsystemets backventil för att kyla det ett tag och värmen bibehålls en stund för att hålla rumstemperaturen konstant. Barnkompressorn kör kontinuerligt utan laddning.


För det andra, i avfuktningsläget, jämfört med kylningsläget, spara ström, eftersom kompressorns drift i avfuktningsläget är intermittent, när omgivningstemperaturen är högre än omgivningstemperaturen är den inställda temperaturen oftast lägre än 27C för generell när kylningen är vid 35 ° C, kompressorn stannar knappast. Intermittent drift sparar mer ström när kompressorn slås på och av i avfuktningsläge, men man måste komma ihåg att avfuktningsfunktionen inte ersätter kylfunktionen.


Vid drift i avfuktningsläge körs inomhusfläkten alltid med låg hastighet, kompressorn slås på och av och kylsystemet används för intermittent kylcykel. Den resulterande kylkapaciteten används i första hand för att balansera inluftens latenta värme. Vattendampen förvandlas till kondenserat vatten. En liten del används för att balansera förnuftig värme, vilket är att sänka lite rumstemperatur. När kompressorn är stoppad stiger rumstemperaturen gradvis långsamt. När den stiger till ca 1C över den inställda temperaturen, startar kompressorn automatiskt, så att den cirkulerar kontinuerligt och håller rumstemperaturen nära det inställda värdet, samtidigt som man tar bort en stor mängd fukt från luften.


Vi vet att avfuktningsläget kan användas under våren. Avfuktningsfunktionen är en mycket praktisk funktion. Spara pengar inte bara utan att behöva köpa en avfuktare. Och avfuktningshastigheten är också relativt snabb. Det kan hjälpa människor att ställa in luftfuktigheten på ett effektivt sätt. Speciellt för boende på första våningen, om vädret är måttligt stort kan du försöka köpa avfuktningsfunktionen. Efter avfuktning kan den minska fuktighetskänslan före avfuktning och kan eliminera den obekväma fuktiga känslan.


För mer information, vänligen kontakta vår projektutvecklingschef enligt nedan:

Do you need to close the window when dehumidifying the household dehumidifier? When dehumidification is required to close the window, we know that the principle of dehumidification is that when the refrigerant in the evaporator evaporates, a large amount of heat is absorbed, reducing the surface temperature of the evaporator, and liquefying the water vapor in the indoor air into water. This condensate will flow through the outlet pipe to the water pan and out of the room. At this point, you need to close the window, otherwise the outdoor humidity will enter again. It will lead to the danger of incomplete dehumidification, so it is best to close the window.  Dehumidifier dehumidification and power saving? First, the lower the temperature setting during dehumidification, the better the dehumidification effect is proportional to the power consumption. When the dehumidification function is set, it is necessary to continuously reverse the reversing valve of the compressor system to cool it for a while, and the heating is maintained for a while to keep the room temperature constant. The baby compressor will run continuously without charging.  Second, in the dehumidification mode, compared with the cooling mode, save power, because the compressor operation in the dehumidification mode is intermittent, when the ambient temperature is higher than the ambient temperature, the set temperature is mostly lower than 27C for general When the cooling is at 35C, the compressor hardly stops. Intermittent operation saves more power when the compressor is turned on and off in dehumidification mode, but it must be remembered that the dehumidification function does not replace the cooling function.  Dehumidifier dehumidification is easy to use? When operating in dehumidification mode, the indoor fan is always running at low speed, the compressor is turned on and off, and the refrigeration system is used for intermittent refrigeration cycle. The resulting cooling capacity is primarily used to balance the latent heat of the indoor air. The water vapor turns into condensed water. A small portion is used to balance sensible heat, which is to lower some room temperature. When the compressor is stopped, the room temperature will gradually rise slowly. When it rises to about 1C above the set temperature, the compressor will automatically start, allowing it to circulate continuously, keeping the room temperature close to the set value, while removing a large amount of moisture from the air.  We know that in the spring, the dehumidification mode can be used. The dehumidification function is a very practical function. Save money not only without the need to purchase a dehumidifier. And the dehumidification speed is also relatively fast. It can help people effectively adjust the humidity in the air. Especially for residents on the first floor, if the weather is moderately large, you can try to purchase the dehumidification function. After dehumidification, it can reduce the feeling of dampness before dehumidification, and can eliminate the uncomfortable damp feeling.

Populära Taggar: fuktabsorberare dehumidifierChina, tillverkare, leverantörer, fabrik, grossist

Skicka förfrågan

(0/10)

clearall